403Webshell
Server IP : 15.235.198.142  /  Your IP : 216.73.216.12
Web Server : Apache/2.4.58 (Ubuntu)
System : Linux ballsack 6.8.0-45-generic #45-Ubuntu SMP PREEMPT_DYNAMIC Fri Aug 30 12:02:04 UTC 2024 x86_64
User : www-data ( 33)
PHP Version : 8.3.6
Disable Function : NONE
MySQL : OFF  |  cURL : ON  |  WGET : ON  |  Perl : ON  |  Python : OFF  |  Sudo : ON  |  Pkexec : OFF
Directory :  /usr/src/linux-headers-6.8.0-45/arch/sparc/boot/

Upload File :
current_dir [ Writeable ] document_root [ Writeable ]

 

Command :


[ Back ]     

Current File : /usr/src/linux-headers-6.8.0-45/arch/sparc/boot/Makefile
# SPDX-License-Identifier: GPL-2.0
# Makefile for the Sparc boot stuff.
#
# Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
# Copyright (C) 1997,1998 Jakub Jelinek (jj@ultra.linux.cz)

ROOT_IMG	:= /usr/src/root.img
ELFTOAOUT	:= elftoaout

hostprogs	:= piggyback
targets		:= tftpboot.img image zImage vmlinux.aout
clean-files	:= System.map

quiet_cmd_elftoaout	= ELFTOAOUT $@
      cmd_elftoaout	= $(ELFTOAOUT) $(obj)/image -o $@
quiet_cmd_piggy		= PIGGY   $@
      cmd_piggy		= $(obj)/piggyback $(BITS) $@ System.map $(ROOT_IMG)
quiet_cmd_strip		= STRIP   $@
      cmd_strip		= $(STRIP) -R .comment -R .note -K sun4u_init -K _end -K _start $< -o $@

ifeq ($(CONFIG_SPARC64),y)

# Actual linking

$(obj)/zImage: $(obj)/image FORCE
	$(call if_changed,gzip)
	@$(kecho) 'Kernel: $@ is ready' '(#'$(or $(KBUILD_BUILD_VERSION),`cat .version`)')'

$(obj)/vmlinux.aout: vmlinux FORCE
	$(call if_changed,elftoaout)
	@$(kecho) 'Kernel: $@ is ready' '(#'$(or $(KBUILD_BUILD_VERSION),`cat .version`)')'
else

$(obj)/zImage: $(obj)/image FORCE
	$(call if_changed,strip)
	@$(kecho) 'Kernel: $@ is ready' '(#'$(or $(KBUILD_BUILD_VERSION),`cat .version`)')'

# The following lines make a readable image for U-Boot.
#  uImage   - Binary file read by U-boot
#  uImage.o - object file of uImage for loading with a
#             flash programmer understanding ELF.

OBJCOPYFLAGS_image.bin := -S -O binary -R .note -R .comment
$(obj)/image.bin: $(obj)/image FORCE
	$(call if_changed,objcopy)

$(obj)/image.gz: $(obj)/image.bin FORCE
	$(call if_changed,gzip)

UIMAGE_LOADADDR = $(CONFIG_UBOOT_LOAD_ADDR)
UIMAGE_ENTRYADDR = $(CONFIG_UBOOT_ENTRY_ADDR)
UIMAGE_COMPRESSION = gzip

quiet_cmd_uimage.o = UIMAGE.O $@
      cmd_uimage.o = $(LD) -Tdata $(CONFIG_UBOOT_FLASH_ADDR) \
                     -r -b binary $@ -o $@.o

targets += uImage
$(obj)/uImage: $(obj)/image.gz FORCE
	$(call if_changed,uimage)
	$(call if_changed,uimage.o)
	@$(kecho) 'Kernel: $@ is ready' '(#'$(or $(KBUILD_BUILD_VERSION),`cat .version`)')'

endif

$(obj)/image: vmlinux FORCE
	$(call if_changed,strip)
	@$(kecho) 'Kernel: $@ is ready' '(#'$(or $(KBUILD_BUILD_VERSION),`cat .version`)')'

$(obj)/tftpboot.img: $(obj)/image $(obj)/piggyback System.map $(ROOT_IMG) FORCE
	$(call if_changed,elftoaout)
	$(call if_changed,piggy)

Youez - 2016 - github.com/yon3zu
LinuXploit